<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: Zoom Service Status Sensor
The Zoom Service Status sensor monitors the global status of all Zoom services.
Zoom Service Status Sensor
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
Sensor in Other Languages
Dutch: Zoom Service Status
French: Zoom Service Status
German: Zoom Service Status
Japanese: Zoom Service Status
Portuguese: Zoom Service Status
Russian: Zoom Service Status
Simplified Chinese: Zoom Service Status
Spanish: Zoom Service Status
Remarks
This sensor only supports the global status of Zoom services.
This sensor supports the IPv6 protocol.
This sensor has a very low performance impact.
This sensor uses lookups to determine the status values of one or more channels. This means that possible states are defined in a lookup file. You can change the behavior of a channel by editing the lookup file that the channel uses. For details, see section Define Lookups.
The Add Sensor dialog appears when you manually add a new sensor to a device. It only shows the settings that are required to create the sensor. You can change nearly all settings on the sensor's Settings tab after creation.
Basic Sensor Settings
Click the Settings tab of a sensor to change its settings.
This setting is for your information only. You cannot change it.
Tags
Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.
It is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).
For performance reasons, it can take some minutes until you can filter for new tags that you added.
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
zoom
zoomsensor
Priority
Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority () to the highest priority ().
Sensor Display
Sensor Display
Setting
Description
Primary Channel
Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.
You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type
Define how different channels are shown for this sensor:
Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit
This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.
Debug Options
Debug Options
Setting
Description
Result Handling
Define what PRTG does with the sensor result:
Discard result: Do not store the sensor result.
Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.
This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.
Inherited Settings
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.
The minimum scanning interval of this sensor is 1 minute.
The recommended scanning interval of this sensor is 5 minutes.
Scanning Interval
For more information, see section Root Group Settings, section Scanning Interval.
Schedules, Dependencies, and Maintenance Window
You cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.
Schedules, Dependencies, and Maintenance Window
For more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.
Access Rights
Access Rights
For more information, see section Root Group Settings, section Access Rights.
Channel Unit Configuration
Which channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels.
Channel Unit Configuration
For more information, see section Root Group Settings, section Channel Unit Configuration.
Channel List
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel
Description
Cloud Recording
The status of Cloud Recording
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Downloading Center
The status of Downloading Center
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Downtime
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status in percent.
Live Streaming
The status of Live Streaming
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Marketplace
The status of Marketplace
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Meeting Telephony Services
The status of Meeting Telephony Services
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
REST API
The status of REST API
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Web Client
The status of Web Client
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Web Portal
The status of Web Portal
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Web SDK
The status of Web SDK
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Webhooks
The status of Webhooks
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Zoom Chat
The status of Zoom Chat
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Zoom Cloud Room Connector
The status of Zoom Cloud Room Connector
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Zoom Connector for Cisco
The status of Zoom Connector for Cisco
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Zoom Connector for Polycom
The status of Zoom Connector for Polycom
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Zoom Dashboard & Reporting
The status of Zoom Dashboard & Reporting
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Zoom Meetings
The status of Zoom Meetings
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
This channel is the primary channel by default.
Zoom Phone
The status of Zoom Phone
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
Zoom Video Webinars
The status of Zoom Video Webinars
Up status: Operational
Warning status: Degraded Performance, Under Maintenance
Down status: Major Outage, Partial Outage
More
KNOWLEDGE BASE
How can I apply Zoom Service Status sensors and Modbus sensors via device templates?